07.07.2020 года (Вт) и 09.07.2020 года (Чт) в 11:00, по UTC/GMT +3, приглашаем Вас на вебинары.

 Темы:
 07.07.2020 - Современные микроконтроллеры компании Nuvoton, сравнение, рекомендации, применение.
 09.07.2020 – Новое поколение модулей SIMCOM – A7670x, для замены устаревающей 2G серии.

 Ссылка для входа в вебинар:
 https://zoom.us/j/2505048015?pwd=d3VtSE8wdEFkUituaHc2eVdDNUJtQT09

 Просим Вас обязательно зарегистрироваться.

 We want to offer you an inexpensive graphical OLED indicator with a resolution of 128 x 64 pixels 0.96 inches diagonally with I? C interface.
 The indicator has a very wide range of applications. Ideal for miniature designs with low energy consumption and can be used in makeshift designs, technical creativity, industrial and automotive devices, etc. Software support (drivers) is available for almost all applications, including the popular Arduino boards.

 Nuvoton company offers a wide range of audio amplifiers with digital and analog input.
 Digital input amplifiers can directly interface with Nuvoton microcontrollers that have an I2S interface. This will eliminate the use of an external codec.
 Pay attention to products that meet the requirements of AEC-Q100 - components that can be used in harsh automotive conditions, without additional qualification tests.

 Brand new modules from ESPRESSIF https://www.espressif.com - ESP32-S2-WROOM modules http://nostris.ee/news/esp32-s2-wroom.pdf and ESP32-S2- WROVER http://nostris.ee/news/esp32-s2-wrover.pdf based on the new 32-bit microcontroller with WiFi and USB- ESP32-S2 http://nostris.ee/news/esp32-s2.pdf
 These modules are built on a 32-bit microcontroller Xtensa® 32-bit LX7 240 MHz, 320 kB SRAM, 128 kB ROM, 16 KB RTC, 4 MB SPI Flash, in modules ESP32-S2-WROVER 2 MB PSRAM is soldered.

 We hope that you are healthy and safe during this difficult time.
 Quarantine is not a reason to refuse development and further projects for the future. Therefore, our engineers have prepared the following solution for you, which will facilitate the development process of your devices.

 Controlling the RFM300W sub-gigahertz radio module (or CMT2300A chip) using the low-cost, low-power 8-bit Nuvoton microcontroller.
 As an example, the engineers of our company developed a COM port extension cable that allows you to transfer a data stream at speeds from 2400 to 51600 bps. The project was carried out on the budget radio module RFM300W-868 from HopeRF, based on the FSK transceiver CMT2300A, controlled by an 8-bit low-power microcontroller of the Nuvoton ML51 series.

 If your project promises to bring significant revenues and you want to avoid competition, we specially offer you a microcontroller with multi-level protection against: viruses, copying software, with reliable protection of transmitted data and with hardware protection against hacking.